Language selection

Search


REGDOC-2.11.1, Waste Management, Volume I: Management of Radioactive Waste

Preface

This regulatory document is part of the CNSC’s waste management series of regulatory documents, which also covers decommissioning. The full list of regulatory document series is included at the end of this document and can also be found on the CNSC’s website.

Regulatory document REGDOC-2.11.1, Waste Management, Volume I: Management of Radioactive Waste, sets out requirements and guidance for managing radioactive waste.

An overview of Canada’s national framework for radioactive waste management is provided in REGDOC-2.11, Framework for Radioactive Waste Management and Decommissioning in Canada.

For information on the implementation of regulatory documents and on the graded approach, see REGDOC-3.5.3, Regulatory Fundamentals.

The words “shall” and “must” are used to express requirements to be satisfied by the licensee or licence applicant. “Should” is used to express guidance or that which is advised. “May” is used to express an option or that which is advised or permissible within the limits of this regulatory document. “Can” is used to express possibility or capability.

Nothing contained in this document is to be construed as relieving any licensee from any other pertinent requirements. It is the licensee’s responsibility to identify and comply with all applicable regulations and licence conditions.

1. Introduction

1.1 Purpose

This document provides requirements and guidance, applicable as part of the licensing basis, for licensees managing radioactive wastes. Specifically it addresses:

  • the management of radioactive wastes
  • radioactive waste storage and disposal facilities

1.2 Scope

REGDOC-2.11.1, Waste Management, Volume I: Management of Radioactive Waste, pertains to CNSC licensees that manage radioactive wastes. Sections 4, 5, 6, 7, 8 and 9 of this regulatory document apply to all licensees that manage radioactive wastes. Sections 10 and 11 contain requirements and guidance specific to radioactive waste storage facilities and disposal facilities, respectively.

This document is complemented by the requirements and guidance in CSA N292.0, General Principles for the Management of Radioactive Waste and Irradiated Fuel [1]. Together, this regulatory document and CSA N292.0 provide requirements and guidance for the management of radioactive waste. Furthermore, this regulatory document is complemented by other CNSC regulatory documents.

1.3 Relevant legislation

The following provisions of the Nuclear Safety and Control Act (NSCA) and the regulations made under it are relevant to this document:

2. The CNSC’s waste management framework

REGDOC‑2.11, Framework for Radioactive Waste Management and Decommissioning in Canada [2], describes the national framework and the philosophy underlying the CNSC’s approach to regulating the management of radioactive waste.

In addition to this regulatory document, the CNSC’s regulatory framework for waste management includes:

  • REGDOC-1.2.1, Guidance on Deep Geological Repository Site Characterization [3]
  • REGDOC-2.11, Framework for Radioactive Waste Management and Decommissioning in Canada [2]
  • REGDOC-2.11.1, Waste Management, Volume II: Management of Uranium Mine Waste Rock and Mill Tailings [4]
  • REGDOC-2.11.1, Waste Management, Volume III: Safety Case for Disposal of Radioactive Waste [5]
  • REGDOC-2.11.2, Decommissioning [6]
  • REGDOC-3.3.1, Financial Guarantees for Decommissioning of Nuclear Facilities and Termination of Licensed Activities [7]

The following CSA standards complement the CNSC’s regulatory framework regarding waste management:

  • N292.0, General Principles for the Management of Radioactive Waste and Irradiated Fuel
  • N292.1, Wet Storage of irradiated Fuel and Other Radioactive Materials
  • N292.2, Interim Dry Storage of Irradiated Fuel
  • N292.3, Management of Low- and Intermediate-Level Radioactive Waste
  • N292.5, Guideline for the Exemption or Clearance From Regulatory Control of Materials That Contain, or Potentially Contain, Nuclear Substances
  • N292.6, Long-Term Management of Radioactive Waste and Irradiated Fuel
  • N294, Decommissioning of Facilities Containing Nuclear Substances

3. Background

Radioactive waste in Canada is defined as any material (liquid, gaseous, or solid) that contains a radioactive nuclear substance, as defined in section 2 of the NSCA, for which no further use is foreseen. In addition to containing nuclear substances, radioactive waste may also contain hazardous substances that are not radioactive, as defined in section 1 of the General Nuclear Safety and Control Regulations.

Safety is considered during all steps of radioactive waste management. The process of radioactive waste management, which may involve several licensees, can include the following steps:

  • generation and control
  • handling, which may comprise:
    • collecting
    • sorting
    • segregating
    • packaging
    • loading
    • transferring
  • processing, which may comprise:
    • pre-treatment
    • treatment
    • conditioning
    • storage
    • transport
    • disposal

4. Graded Approach

This document may be applied in a graded manner commensurate with risk. With a graded approach, all requirements shall apply, but to varying degrees depending upon the safety significance and complexity of the work being performed. Consideration for the nature and level of the hazards, complexity of the facility, complexity of the activity, and the characteristics of the waste should be taken into account. Further information on the graded approach can be found in REGDOC-3.5.3, Regulatory Fundamentals [8].

5. General Requirements

All licensees who manage radioactive waste shall:

  • be responsible for its safe management, taking into consideration the health and safety of persons, the environment and national security
  • optimize the steps in radioactive waste management and practices to ensure the protection of the health and safety of people and the environment 
  • take into account interdependencies among all steps in radioactive waste management, as appropriate; each step shall be evaluated as an individual step in the process and as part of an integrated radioactive waste management system
  • produce and/or maintain records for each of the steps in the management of radioactive waste for which they are responsible
  • develop, document and implement programs, procedures and instructions to ensure the safety of waste management activities for which they are responsible, commensurate with the scale of the licensed activity and the waste inventory
  • use operational experience, lessons learned from other similar facilities or activities, and advances in science and technology in an effort to continuously improve the safety of the waste management facility or activity

6. Waste Management Program

Where a licensee is required by its licence to implement and maintain a waste management program, the program shall control the management of radioactive waste where it is generated, handled, processed, stored, transported or disposed of.

The waste management program shall:

  • identify the waste management activities to be undertaken
  • clearly state requirements, criteria and objectives to be met, and safety standards to be used
  • establish an organizational structure that specifies the roles and responsibilities for positions with respect to the safe management of radioactive waste
  • identify the management system elements that ensure the effectiveness of the waste management program
  • encompass all waste streams associated with or contaminated by nuclear substances
  • consider the waste hierarchy
  • require records of the waste inventory under control and maintain those records

The licensee shall implement and maintain associated programs and procedures to support the waste management program (e.g. waste characterization). These programs and procedures should be commensurate with the risk of the waste streams being managed.

7. Radioactive Waste Classification, Waste Characterization and Waste Acceptance Criteria

7.1 Waste classification

In Canada, there are four general classes of radioactive waste used as the basis for a classification system:

  • Low-level radioactive waste (LLW) contains material with radionuclide content above established unconditional clearance levels and exemption quantities (set out in the Nuclear Substances and Radiation Devices Regulations), but generally has limited amounts of long‑lived radionuclides. LLW requires isolation and containment for periods of up to a few hundred years and is suitable for disposal in near surface facilities.
  • LLW includes the following sub-classes:
    • Very low-level radioactive waste (VLLW) has a low hazard potential and is above the criteria for unconditional clearance levels and exemption quantities. Long-term waste management facilities for VLLW do not need a high degree of containment or isolation. Concentrations of longer lived radionuclides in VLLW are generally very limited.
    • Very short-lived low-level radioactive waste (VSLLW) is waste that can be stored for a decay period of not more than a few years and subsequently cleared for release. VSLLW includes radioactive waste containing only short half-life radionuclides typically used for research and biomedical purposes. The main criterion for VSLLW is the half-life of the predominant nuclides. In general, the management option of storage for decay for VSLLW should only apply to radionuclides with a half-life of 100 days or less.
  • Intermediate-level radioactive waste (ILW) generally contains long-lived radionuclides in concentrations that require isolation and containment for periods greater than several hundred years. ILW needs no provision, or only limited provision, for heat dissipation during its storage and disposal. Due to its long-lived radionuclides, ILW generally requires a higher level of containment and isolation than can be provided in near surface repositories.
  • High-level radioactive waste (HLW) is used nuclear fuel that has been declared as radioactive waste and/or is waste that generates significant heat via radioactive decay. HLW typically has levels of activity concentration in the range of 104 to 106 TBq/m3. HLW is associated with penetrating radiation, and thus shielding is required. HLW also contains significant quantities of long-lived radionuclides necessitating long-term isolation.
  • Uranium mine and mill tailings are a specific type of radioactive waste generated during the mining and milling of uranium ore and the production of uranium concentrate. In addition to tailings, mining activities typically result in the production of large quantities of waste rock as workings are excavated to access the ore body. The wastes contain long-lived radionuclides that do not decrease significantly over extended time periods. Further information can be found in REGDOC-2.11.1, Waste Management Volume II: Management of Uranium Mine Waste Rock and Mill Tailings [4].

The licensee shall implement a radioactive waste classification system. The classification system shall be based on the four general class of wastes and shall consider the site-specific safety case and supporting safety assessment required for the waste management facility or activity.

Waste should be classified according to the degree of containment and isolation required to ensure safety with consideration given to the hazard potential of different types of waste and the timeframe associated with the hazard.

7.2 Waste characterization

The licensee shall perform waste characterization at appropriate steps in the management of radioactive waste. The characterization of radioactive waste shall include the principal radionuclides relevant to safety and assurance that the waste or waste package will meet the acceptance criteria for the appropriate steps in the management of radioactive waste. Waste characterization shall include assessing the physical, mechanical, chemical, biological, thermal and/or radiological properties of the waste, including dominant radionuclide content, as applicable. The licensee shall maintain records of the relevant characteristics of the waste based on the characterization performed.

7.3 Waste acceptance criteria

A licensee that receives waste shall develop waste acceptance criteria consistent with, and derived from, the site-specific safety case. The waste acceptance criteria shall specify the chemical, physical, radiological, mechanical, biological and other characteristics of the waste, waste forms, packages and unpackaged waste that will be accepted for handling, processing, storage, transport and/or disposal at the facility or location of the activity.

In situations where acceptance requirements for disposal are not yet available, the licensee should develop waste acceptance criteria with reasonable assumptions about the anticipated disposal option.

8. Steps in the Management of Radioactive Waste

8.1 Generation

The licensee shall consider the waste hierarchy in the management of radioactive waste.

The licensee shall consider measures to control the generation of radioactive waste in terms of both volume and radioactivity content as early as possible prior to the commencement of licensed activities and on an ongoing basis.

The clearance and exemption of waste from regulatory control after having been appropriately characterized, processed and/or stored for a sufficiently long period of time, together with the reuse and recycling of material, can be effective in reducing the amount of radioactive waste that needs further processing or storage. The limits and controls for clearance and exemption from regulatory control are found in the Nuclear Substances and Radiation Devices Regulations.

8.2 Handling

For the selected waste handling method(s), the licensee shall take into consideration:

  • the characteristics of the waste
  • the types of containment systems and packages required for safety
  • the minimization of radiological risks in accordance with the ALARA principle

8.3 Processing

The licensee shall take into consideration the characteristics of the waste and the subsequent steps in its management when selecting waste processing methods.

The licensee should reduce the hazard potential of the waste as is practicable at each stage of waste processing. The licensee should consider early processing of waste to convert it to a passively safe form or to otherwise stabilize it.

The licensee should segregate sealed sources from other wastes. The licensee should keep spent or disused sealed sources in a shielded container during handling.

The licensee shall not subject spent or disused sealed sources to compaction, shredding or incineration in order to ensure their integrity. If the integrity of a sealed source has been compromised, the licensee shall no longer treat it as a sealed source.

8.4 Transport

The Packaging and Transport of Nuclear Substances Regulations, 2015 and the Transportation of Dangerous Goods Regulations apply to the transport of radioactive waste. While not subject to those regulations, onsite transfers (not on public roads) should meet an equivalent level of safety.

8.5 Storage

The licensee shall store radioactive waste safely, in a manner that provides for the protection of people, the environment and national security, and that is in accordance with regulatory requirements.

The licensee shall conduct storage activities in accordance with its documented procedures. The licensee shall consider the impact of any modification to these activities on the safety of the stored waste.

The licensee shall store the waste in a manner where it can be inspected, monitored, retrieved and preserved in a condition suitable for its subsequent management.

For additional criteria for the storage of radioactive waste, refer to section 10, Radioactive Waste Storage Facility.

8.5.1 Decay storage

The licensee should segregate radioactive waste designated for decay storage from other waste, from the point of generation to its disposition.

8.6 Disposal

The licensee shall dispose of radioactive waste safely, in a manner that provides for the protection of people, the environment and national security, and that is in accordance with regulatory requirements.

The licensee shall carry out disposal activities in accordance with its documented procedures. The licensee shall consider the impact of any modification to these activities on the safety of the disposed waste.

For additional criteria for the disposal of radioactive waste, refer to section 11, Radioactive Waste Disposal Facility.

9. Waste Packages

Where applicable, the licensee shall use engineered waste packages to contain radioactive waste in accordance with applicable regulations for normal operation and in postulated accident conditions. The licensee shall use engineered waste packages for their intended use in the handling, processing, storage, disposal, and, if applicable, the transport of waste.

The licensee shall ensure that waste packages and unpackaged waste accepted for processing, storage and/or disposal conform to the waste acceptance criteria for the licensed facility or activity.

10. Radioactive Waste Storage Facility

10.1 General requirements

The licensee shall develop, implement and maintain a safety case for the entire lifecycle of the radioactive waste storage facility in accordance with applicable regulations.

10.2 Site preparation

10.2.1 Site characterization

The licensee shall characterize the site of a radioactive waste storage facility at a level of detail sufficient to support an understanding of the current site characteristics and how the site is anticipated to evolve over the duration of the facility’s lifecycle.

10.2.2 Facility design

The licensee shall design the radioactive waste storage facility to fulfill the applicable safety functions during normal operation and postulated initiation events (e.g., anticipated operational occurrences, design-basis accidents and design extension conditions), as follows:

  • control of sub-criticality
  • removal of heat
  • radiation shielding
  • confinement of radioactive waste
  • retrievability

The licensee shall ensure that the design features of the facility are appropriate for the characteristics of the waste to be stored.

The licensee shall design the radioactive waste storage facility to facilitate the inspection, monitoring, testing, and maintenance of:

  • the structures, systems and components (SSCs) important to safety
  • waste packages stored in the facility

The licensee shall identify and classify SSCs important to safety. Passive SSCs should be prioritized before active SSCs. For active SSCs, consideration should be given to the following: the reliability of the SSCs; the need for redundancy and diversity; and the behaviour of the SSCs in the event of postulated initiating events.

The licensee should ensure that process system controls (e.g., waste handling, equipment and ventilation systems) are independent of protection systems. If this is not feasible, justification should be provided for the use of shared and interrelated systems.

10.3 Construction

The licensee shall construct the radioactive waste storage facility in accordance with the accepted design.

The licensee shall ensure that any changes made to the design during construction are subject to a change-control process.

The licensee shall verify that the SSCs important to safety perform as per design performance criteria. Upon the completion of commissioning, the licensee shall produce a final commissioning report. The report shall provide assurance that all applicable regulatory requirements and performance criteria have been met.

10.4 Operation

The licensee shall establish and document operational limits and conditions derived from safety assessments for the radioactive waste storage facility, in order to maintain and operate the facility in a safe state.

The licensee shall operate the radioactive waste storage facility in accordance with documented procedures. Procedures should be developed for managing and operating a radioactive waste storage facility under normal conditions and during postulated initiating events. The licensee should consider how any modification to operations would impact the safety of the stored waste.

The licensee shall monitor the operational limits and conditions. The operational limits and conditions should be revised for any of the following reasons:

  • experience gained by the licensee or other licensees or businesses
  • following modifications made to the facility and/or to the type of radioactive waste stored
  • as part of the process of periodically reviewing the safety case for the facility
  • relevant changes in legislative or regulatory requirements

The licensee shall maintain, test and inspect the facility in accordance with the design intent for the facility.

The licensee shall establish an aging management plan to provide for the timely detection and mitigation of aging effects, in order to ensure integrity and functional capacity of the SSCs throughout all stages of the facility’s lifecycle.

10.5 Decommissioning

The licensee shall carry out the decommissioning of the radioactive waste storage facility in accordance with REGDOC-2.11.2, Decommissioning [6].

11. Radioactive Waste Disposal Facility

11.1 General requirements

The licensee shall develop, implement and maintain a safety case for the entire lifecycle of the radioactive waste disposal facility, and a post-closure safety assessment, in accordance with applicable regulations.

The licensee shall ensure that each of the stages in the lifecycle of a disposal facility is supported, as necessary, by evaluations of the site, design, construction, operation and closure of the facility, and of the performance and safety of the disposal system. Each of these stages shall be supported as necessary by an iterative evaluation of the disposal system.

The licensee shall ensure the safety of the facility by means of multiple safety functions including the use of multiple barriers and controls; for example, the host environment, engineered barriers, and operating the facility within the limits and conditions derived from the safety assessments.

The licensee shall site, design, construct, commission, operate and close the disposal facility:

  • in such a way that safety is ensured by passive means to the fullest extent possible
  • so as to minimize the need for actions to be taken after closure of the facility

The licensee shall identify SSCs important to safety.

For radioactive waste disposal facilities, REGDOC-2.11.1, Waste Management, Volume III: Safety Case for Disposal of Radioactive Waste [5], provides requirements and guidance for licensees and applicants.

11.2 Site Preparation

11.2.1 Site characterization

The licensee shall characterize the site at a level of detail sufficient to support an understanding of the current site characteristics and how the site is anticipated to evolve over time for the radioactive waste disposal facility.

REGDOC-1.2.1, Guidance on Deep Geological Repository Site Characterization [3], provides guidance for deep geological repository applicants.

11.2.2 Facility design

The licensee shall design the radioactive disposal facility and its engineered barriers to:

  • contain the waste
  • be physically and chemically compatible with the host environment
  • provide safety during the pre-closure phase (i.e., construction, operation, decommissioning) during normal operation and postulated initiation events
  • provide safety features post-closure that complement those features afforded by the host environment
  • facilitate the inspection, monitoring, testing and maintenance of the systems important to safety and the elements of the host environment that are credited in the safety case

The licensee shall base the design of a disposal facility upon:

  • expected performance of the facility to protect the health and safety of persons and the environment for time periods that account for the time of maximum effect, or for a time period to be justified by the licensee
  • characteristics and inventory of the radioactive waste to be emplaced
  • characteristics of the local and regional environment
  • the development of waste acceptance criteria for the radioactive waste to be emplaced
  • the safety assessment developed for the facility that reflects the chosen waste acceptance criteria

The licensee shall identify and classify SSCs important to safety.

The licensee shall ensure that the design of a disposal facility:

  • allows for the containment and isolation of the radioactive waste or irradiated fuel to be emplaced
  • uses multiple barriers (defence in depth)
  • uses approved engineering practices and principles, and change-control processes
  • allows for the safe emplacement of radioactive waste into the facility
  • allows for condition assessment inspections of safety-significant SSCs prior to closure
  • considers off-gas generated by the radioactive waste over time
  • allows for the measurement of water in safety-significant SSCs prior to closure
  • allows for maintenance activities of SSCs prior to closure

The licensee shall consider closure in the initial design of the facility. Plans for closure must be updated as the design of the facility is developed.

11.3 Construction

The licensee shall construct the radioactive waste disposal facility in accordance with the accepted design.

The licensee shall ensure that any changes to design during construction or that any unplanned disturbances to the host environment are subject to a change-control process.

The licensee should avoid or limit unintended disturbances to the host environment during construction. The licensee should perform all construction activities to preserve the containment and/or isolation features of the natural barriers of the host environment that were credited in the safety case.

The licensee shall verify that the design meets specifications and shall perform commissioning activities. Commissioning shall demonstrate that the SSCs important to safety perform as expected in support of operations. The licensee shall produce a final commissioning report upon completion of commissioning. The report shall provide assurance that all applicable regulatory requirements and performance criteria have been met.

11.4 Operation

The licensee shall establish and document operational limits and conditions derived from safety assessments in order to maintain and operate the radioactive waste disposal facility in a safe state.

The licensee shall operate the radioactive waste disposal facility in accordance with documented procedures. Procedures should be developed for managing and operating a radioactive waste disposal facility under normal conditions and postulated initiating events. The licensee should consider how any modification to the operation could impact the safety of the emplaced waste.

The licensee shall monitor the operational limits and conditions, which should be revised, as necessary, for any of the following reasons:

  • experience gained by the licensee or other licensees or businesses
  • after modifications are made to the facility and/or to the type of radioactive waste emplaced
  • as part of the process of periodically reviewing the safety case for the facility
  • relevant changes in the legislative or regulatory requirements

The licensee shall maintain, test and inspect the facility in accordance with the design intent for the facility.

The licensee shall establish an aging management plan to provide for the timely detection and mitigation of the aging effects, in order to ensure integrity and functional capacity of the SSCs appropriate to the facility’s lifecycle.

11.5 Decommissioning

11.5.1 Facility closure

The licensee shall close the radioactive waste disposal facility while maintaining the integrity of those SSCs that perform safety functions and that have been shown to be important to safety in the post-closure phases. The licensee shall ensure that plans for closure, including the transition from active management of the facility, are well defined and practicable so that closure can be carried out safely.

11.5.2 Decommissioning of ancillary facilities

The licensee shall carry out the decommissioning of the support facilities in accordance with REGDOC-2.11.2, Decommissioning [6].

11.6 Monitoring and surveillance

The licensee shall develop a monitoring and surveillance program for the radioactive waste disposal facility, to be implemented prior to and during construction and operation of a radioactive waste disposal facility. The licensee shall also develop a monitoring and surveillance program for the facility to be carried out and after the facility’s closure, if such a program is part of the safety case. The monitoring and surveillance program shall:

  • demonstrate compliance with regulatory requirements and with licence conditions
  • verify that the disposal facility is performing as expected
  • verify that the key assumptions made and models used to assess safety continue to be consistent with actual conditions
  • maintain records of the disposal facility, the site and the environment
  • ensure the protection and preservation of passive safety features

After closure, the licensee shall remain responsible for any surveillance and remedial actions of the radioactive waste disposal facility unless other arrangements for institutional controls are in place.

11.7  Post-closure period of a radioactive waste disposal facility and institutional controls

The licensee shall prepare plans to address the period following closure of the radioactive waste disposal facility to address institutional controls. These plans shall be consistent with passive safety features that form part of the safety case for the disposal facility.

The CNSC expects the following actions to be taken during the post-closure period:

  • implementation of a visual inspection plan for periodic examination of the site to look for signs of deterioration of the facility (e.g., slumping of the ground) or erosion of the surface
  • implementation and maintenance of a monitoring and surveillance plan to ensure that the post-closure objectives set out in the safety case continue to be met
  • implementation of active controls, where required, to prevent unauthorized access to the site

Note: Active controls include periodic inspections and surveillance, controlled access, limited usage of the disposal site and minor maintenance. Active controls are followed by passive controls, which ensure that knowledge of the disposal site is maintained and that future uses of the site are controlled.

Glossary

For definitions of the terms used in this document, see REGDOC‑3.6, Glossary of CNSC Terminology, which includes terms and definitions used in the Nuclear Safety and Control Act and the regulations made under it, and in CNSC regulatory documents and other publications. REGDOC‑3.6 is provided for reference and information.

References

The CNSC may include references to information on best practices and standards such as those published by CSA Group. With permission of the publisher, CSA Group, all nuclear-related CSA standards may be viewed at no cost through the CNSC Web page “How to gain free access to all nuclear-related CSA standards”.

Additional Information

The CNSC may recommend additional information on best practices and standards such as those published by CSA Group. With permission of the publisher, CSA Group, all nuclear-related CSA standards may be viewed at no cost through the CNSC Web page “How to gain free access to all nuclear-related CSA standards”.

The following documents are not referenced in this regulatory document but contain information that may be useful to the reader:

·    Natural Resources Canada. Radioactive Waste Policy Framework.

·    CSA Group. CSA N292.1, Wet Storage of Irradiated Fuel and Other Radioactive Materials. Mississauga, 2016.

·    CSA Group. CSA N292.2, Interim Dry Storage Of Irradiated Fuel. Mississauga, 2013.

·    CSA Group. CSA N292.3, Management of Low- and Intermediate-Level Radioactive Waste. Mississauga, 2008.

·    CSA Group. CSA N292.5, Guideline for the Exemption or Clearance From Regulatory Control of Materials That Contain, or Potentially Contain, Nuclear Substances. Mississauga, 2011.

·    CSA Group. CSA N292.6, Long-Term Management of Radioactive Waste and Irradiated Fuel. Mississauga, 2018.

·    CSA Group. CSA N294, Decommissioning of Facilities Containing Nuclear Substances. Mississauga, 2019.

·    International Atomic Energy Agency (IAEA). IAEA General Safety Requirements No. GSR Part 5, Predisposal Management of Radioactive Waste. Vienna, 2009.

·    IAEA. IAEA Safety Standard No. GSG-1, Classification of Radioactive Waste. Vienna, 2009.

·    IAEA. IAEA Specific Safety Requirements No. SSR-5, Disposal of Radioactive Waste. Vienna, 2011.

CNSC Regulatory Document Series

Facilities and activities within the nuclear sector in Canada are regulated by the CNSC. In addition to the Nuclear Safety and Control Act and associated regulations, these facilities and activities may also be required to comply with other regulatory instruments such as regulatory documents or standards.

CNSC regulatory documents are classified under the following categories and series:

  • 1.0 Regulated facilities and activities
  • Series 1.1 Reactor facilities
    • 1.2 Class IB facilities
    • 1.3 Uranium mines and mills
    • 1.4 Class II facilities
    • 1.5 Certification of prescribed equipment
    • 1.6 Nuclear substances and radiation devices
  • 2.0 Safety and control areas
  • Series 2.1 Management system
    • 2.2 Human performance management
    • 2.3 Operating performance
    • 2.4 Safety analysis
    • 2.5 Physical design
    • 2.6 Fitness for service
    • 2.7 Radiation protection
    • 2.8 Conventional health and safety
    • 2.9 Environmental protection
    • 2.10 Emergency management and fire protection
    • 2.11 Waste management
    • 2.12 Security
    • 2.13 Safeguards and non-proliferation
    • 2.14 Packaging and transport
  • 3.0 Other regulatory areas
  • Series 3.1 Reporting requirements
    • 3.2 Public and Indigenous engagement
    • 3.3 Financial guarantees
    • 3.4 Commission proceedings
    • 3.5 CNSC processes and practices
    • 3.6 Glossary of CNSC terminology

Note: The regulatory document series may be adjusted periodically by the CNSC. Each regulatory document series listed above may contain multiple regulatory documents. Visit the CNSC’s website for the latest list of regulatory documents.

Page details

Date modified: